This was very simple because all we had to do for this assignment was change the camera view and then use the different shapes that there are for Google sketch.
21B- 3D Objects
This was also simple because we did the same thing we did in assignment 21A and then we used the push and pull tool and that made the shapes 3 dimensional.
21C- Your Name
The concept of this assignment is simple. All you have to do is write your name out using the shapes in Google sketch. This could be very simple or a little bit difficult depending on the letters in your name. Some letters are harder to create than others.
22-Recreating the Blocks
Block 1
8*5*5
Block 2
8*5*6
Block 3
9*4*6
Block 4
7*6*4
Block 5
8*5*5
Block 6
8*5*6
Block 7
8*5*6
Block 8
9*5*6
Block 9
9*4*6
Block 10
11*4*6
Block 11
8*6*6
Block 12
9*4*6
These blocks weren't very hard. There were some blocks that were harder than others. The hardest blocks were the ones that required the slanted surface. To make the block as close to the blocks we were copying in size we needed to use the tape measure tool a lot. To make sure the blocks were the same size we counted the diamonds on the reference image and used those measurements as feet. To actually adjust the size of the blocks we used the push and pull tool. In some cases the block needed to be marked I used the line tool to make the marks. When there was a piece of block that needed to be shortened or just taken away I used the push pull tool. For the blocks that had the slanted surface I used the move tool on the corner of the block and moved it until the surface became flat and slanted.
23- Gingerbread house
The gingerbread house wasn't hard to create. For this I used Google sketch up. The only thing required to do this were squares, triangles and circles. The hardest part of making the house was making the icing loops on the roof. Besides that, this was easy.
24- Did not do
25-Animated Button
The glowing button was kind of difficult to create. The hardest part of making the glowing button was actually making the button glow. There weren't that many steps to making this.There weren't many tools used for this. The most used tool was the ellipse tool to create the circles. To make the button have the rings I had to add noise and then do a radial blur. To make the button glow I first downloaded the power symbol. Next, I had to adjust the layer style to the original button. After I had to create a new group and with this group I made the button turn on and off. I had to adjust the layer style again and make the symbol green. To make the button actually turn on and off I went back to the original power symbol and opened the animation panel. That creates an image of the button off. Then, I duplicate the button, but use the button on instead. After selecting both the on and off button I select tween after clicking the grey arrow and that creates all of the phases between the button turning on and off. I reversed the frames so the button goes from on to off instead of off to on. After changing the delay time and pressing the play button the button turns on and off.
26-showcase
This was a little hard to make because there were so many steps. The first step was to make a black rectangle. After making the rectangle I made the ruler tool visible and used them as guides for the size of the rectangle. After adjusting the guides I began making the foundation. I used the rectangle tool to fill in the left and right walls. Next comes the floor, ceiling, and middle. Next I adjusted the perspective of the floor to make the room look three dimensional. I did this to all of the corners of the room. Next I changed the the layer styles of the walls, floor,ceiling, and back wall. To make the lights I used the ellipse tool, adjusted the layer style, and then added a smaller white circle to make a light. I copied this to make all three lights. next, using the elliptical marquee tool I made the shadow of the light on the floor and also created the light path going straight down. After this i took my picture and placed it under each light.
This semester I used Photoshop for the first time. I learned a lot from this semester. I learned how to alter images and make things. I also used Google sketch up for the first time. That is good for making geometric shapes.
No comments:
Post a Comment